Description
ELGi Airlube Recip ISO99 - 1 Quart
Reciprocating Compressor Lubricant • 1 Quart • Reciprocating (piston) air compressors where ISO 99 lubricant is specified
ELGi Airlube Recip ISO99 - 1 Quart is designed for reciprocating compressor service where the compressor manual specifies an ISO 99 lubricant. Using the correct viscosity and compressor-approved oil helps support ring and cylinder lubrication, temperature control, and overall reliability.
Key Features
- Matched viscosity for reciprocating compressor lubrication requirements
- Helps protect moving components under heat and load common in piston compression
- Supports cleaner operation when used with proper change intervals
- Packaged for convenient top-offs and routine maintenance
- Best results when paired with clean intake filtration and proper operating temperatures
Specifications
| Product Type: | Reciprocating Compressor Lubricant |
| Intended Use: | Reciprocating (piston) air compressors where ISO 99 lubricant is specified |
| Package Size: | 1 Quart |
| MPN: | 998044 |
| ISG Product ID: | ELGI_000998044 |
Benefits
- Consistent lubrication for piston/cylinder wear control
- Reduced risk of using the wrong viscosity oil in critical components
- Simple stocking for scheduled maintenance and top-offs
- Supports longer component life when maintained per the compressor manual
Usage & Handling Notes
- Confirm the required oil type and viscosity in your compressor manual before use.
- Do not mix different lubricant types unless the manufacturer explicitly allows it.
- Keep containers sealed and stored in a clean, dry area to prevent contamination.
- Record oil changes (hours/date) to keep maintenance intervals consistent.
Use 998044 to confirm you’re selecting the correct maintenance supply for your equipment and application.
Frequently Asked Questions
ELGi Airlube Recip ISO99 - 1 Quart
▶️ Question: What does ISO 99 indicate on a compressor oil?
Answer: It refers to an ISO viscosity grade. Always match the oil viscosity and type recommended by your compressor manufacturer for your operating conditions.
▶️ Question: Can I use this oil in a rotary screw compressor?
Answer: Only if the compressor manual specifically calls for this lubricant. Rotary screw compressors often require different formulations than reciprocating units.
▶️ Question: Should I mix this oil with what’s already in the compressor?
Answer: Mixing lubricants can change performance and may create deposits. If you are unsure what’s in the machine, drain and refill with the correct oil per the manual.
▶️ Question: How often should I change reciprocating compressor oil?
Answer: Change intervals depend on run hours, temperature, and environment. Follow the compressor’s service schedule and shorten intervals in dusty or high-heat conditions.
▶️ Question: What’s the best way to avoid oil contamination?
Answer: Use clean funnels, wipe fill areas before opening, keep caps on, and maintain intake filtration to reduce dirt and moisture entry.
