Description
ELGi ECFP1000 Carbon Filter 1000CFM Service Element
Activated Carbon Stage • 1000 CFM
This ECFP carbon filter service element is designed to reduce oil vapour and odor-related contaminants in compressed air systems as a polishing stage.
Activated carbon filtration grade targets oil vapour reduction down to 0.003 mg/m³. Verify compatibility using your ELGi equipment model/serial and service parts list before ordering.
Key Features
- Activated carbon media targets oil vapour reduction for improved point-of-use air quality.
- Commonly used downstream of coalescing fine filtration for best carbon life and performance.
- Service element format supports fast replacement as part of preventive maintenance.
- Helps reduce odor/taste concerns and vapour-related residue in sensitive applications.
Specifications
| MPN | B016506880011 |
|---|---|
| Series | ELGi Inline / Downstream Filtration |
| Filter Stage | Carbon (Vapour Reduction) |
| Nominal Flow | 1000 CFM (as listed) |
| Typical Replacement | 6 months (typical) or sooner if oil vapour load is high. |
Benefits
- Improves air quality where oil vapour or odor is a concern.
- Supports cleaner end-use results by polishing air downstream of coalescing filters.
- Helps reduce vapour-related contamination risk in pneumatic applications.
Installation & Application Notes
- Install after a coalescing fine filter to protect carbon media from aerosols and moisture.
- Element life depends on vapour load, temperature, and duty cycle—replace on schedule or when performance drops.
- Evaluate suitability if your application requires removal of specific gases; carbon elements do not remove all gases.
- Verify compatibility using your ELGi equipment model/serial and service parts list before ordering.
Frequently Asked Questions
ELGi ECFP1000 Carbon Filter 1000CFM Service Element
▶️ Question: What problem does a carbon element solve?
Answer: It reduces oil vapour and odor-related contaminants that can pass through coalescing stages.
▶️ Question: Where should I place a carbon stage?
Answer: Typically after pre + fine coalescing filtration and close to the point of use.
▶️ Question: How often should I replace carbon media?
Answer: A common guideline is ~6 months, but replace sooner if oil vapour load is high or air quality drops.
▶️ Question: Will this remove liquid water?
Answer: No—use a dryer and coalescing filtration upstream for moisture control.
▶️ Question: Can I use carbon filtration for medical air?
Answer: If medical-grade requirements apply, use filtration specifically designed and validated for that application.
