Description
Altec AIR HRL-0025 Heatless Desiccant Air Dryer
The Altec AIR HRL Series consists of high-capacity regenerative (heatless) desiccant air dryers designed to meet the needs of the industrial compressed air market. Model HRL-0025-1 is rated for 25 SCFM @ 100 PSIG.
Standard equipment includes ASME / CRN approved pressure vessels, factory installed filters with differential pressure gauges and a pre-filter timer drain, E-Z switching valves for extreme valve life, and an ETL listed Pro-Logic controller with a NEMA 4 enclosure. Regulated purge flow helps maintain optimum settings regardless of operating pressure, and -40°F/C outlet dew point air is standard.
Key Features
- -40°F/C outlet dew point: ISO 8573.1 Class 2 -40°F/C standard outlet dewpoint.
- ASME / CRN pressure vessels: ASME / CRN approved pressure vessels.
- Integrated filtration: Factory installed filters with differential pressure gauges and pre-filter timer drain.
- Long-life switching valves: E-Z switching valves for extreme valve life.
- Industrial controller enclosure: ETL listed Pro-Logic controller with NEMA 4 enclosure.
- Regulated purge flow: Regulated purge flow for optimum setting, regardless of operating pressure.
- Power requirements: 120 VAC, 1 phase, 60 Hz.
- EcoTronic (E): EcoTronic dew point demand control included.
- Environment kit (L1): Indoor low ambient kit.
Specifications
| Model | HRL-0025-1 |
|---|---|
| Dryer Type | Heatless Desiccant Air Dryer |
| Inlet Flow Capacity | 25 SCFM @ 100 PSIG |
| Approx. Purge | 3.75 SCFM |
| Inlet / Outlet Ports | 1/2" NPT |
| Standard Outlet Dew Point | -40°F/C (ISO 8573.1 Class 2) |
| Maximum Inlet Pressure | 150 PSIG (standard) |
| Maximum Operating Temperature | 120°F / 49°C |
| Operating Voltage | 120 VAC / 1 Phase / 60 Hz |
| Dimensions (in) | H 60 × W 22 × D 14 |
| Approx. Weight | 155 lb |
| EcoTronic Option | Yes (E) |
| Environment Temperature Protection | Indoor low ambient kit (L1) |
Benefits
- Industrial-grade construction: ASME / CRN pressure vessels and bolt-down construction support demanding installations.
- Moisture control performance: -40°F/C outlet dew point is standard for the HRL Series.
- Service visibility: Differential pressure gauges and a pre-filter timer drain help support routine maintenance.
- Reliable cycling components: E-Z switching valves are designed for extreme valve life.
- Consistent purge settings: Regulated purge flow helps maintain optimum settings regardless of operating pressure.
- Demand-based control option: EcoTronic dew point demand control is included on this configuration.
- Temperature protection option: Environment temperature protection kit is included on this configuration.
Installation & Application Notes
- Sizing is based on the Compressed Air and Gas Institute (CAGI) ADF 200 Standard for compressed air at 100 PSIG inlet pressure and 100°F inlet temperature with a -40°F pressure dew point.
- For inlet pressures other than 100 PSIG, maximum inlet flow (-40°F/C PDP) = INLET Flow × INLET Flow Factor (A) at actual pressure (see multiplier table).
- 150 PSIG is standard maximum inlet pressure; for inlet pressures that exceed the HRL standard input, contact Altec AIR for assistance.
The Altec AIR HRL-0025 is a heatless desiccant air dryer configuration rated for 25 SCFM @ 100 PSIG with approximately 3.75 SCFM purge and 1/2" NPT connections.
Frequently Asked Questions
Altec AIR HRL-0025 Heatless Desiccant Air Dryer
▶️ Question: What inlet conditions is the HRL flow rating based on?
Answer: Sizing is based on the CAGI ADF 200 Standard for compressed air at 100 PSIG inlet pressure and 100°F inlet temperature with a -40°F pressure dew point.
▶️ Question: How do I size for inlet pressures other than 100 PSIG?
Answer: Use the multiplier table: maximum inlet flow (-40°F/C PDP) = INLET Flow × INLET Flow Factor (A) at your actual inlet pressure.
▶️ Question: What does the EcoTronic (E) option add?
Answer: EcoTronic is an optional dew point demand control. On this configuration, the EcoTronic option is included.
▶️ Question: What do the L and L1 environment temperature protection codes mean?
Answer: L = outdoor low ambient kit -20°F. L1 = indoor low ambient kit.
