150 NCH 115V Non-Cycling Refrigerated Air Dryer 1 Ph, 60 Hz

blank star blank star blank star blank star blank star 0 reviews
  • Part Number: 150NCH-115-1-60
  • Brand Zeks
  • In/Out Connection 1 1/2" NPT
  • Air Dryer Type Non-Cycling Refrigerated
  • Hertz 60 HZ
  • Max PSI 200 PSI
  • Phase 1 Phase
  • Voltage 115
  • CFM Range 150-199 CFM
  • Flow Rate (scfm) 150
  • Inlet Flow (scfm) 150
  • Cooling Air Cooled
  • Model NCH
View More Product Information

$5,267.00

Qty
Adding to cart… The item has been added

Estimated Lead Time

7-10 Days

Estimated Lead Time

7-10 Days

  • Part Number: 150NCH-115-1-60
  • Brand Zeks
  • In/Out Connection 1 1/2" NPT
  • Air Dryer Type Non-Cycling Refrigerated
  • Hertz 60 HZ
  • Max PSI 200 PSI
  • Phase 1 Phase
  • Voltage 115
  • CFM Range 150-199 CFM
  • Flow Rate (scfm) 150
  • Inlet Flow (scfm) 150
  • Cooling Air Cooled
  • Model NCH
View More Product Information

Description

ZEKS 150NCH NC Series Non-Cycling Refrigerated Air Dryer

The ZEKS 150NCH is a non-cycling refrigerated compressed air dryer designed to help reduce moisture in compressed air systems by cooling the air stream and removing condensate. Built for industrial compressed air applications, it helps reduce water-related corrosion, contamination, and downstream equipment issues.

ZEKS NC Series dryers list standard equipment including a microprocessor controller, remote alarm contact, electronic drain, and a NEMA 12 electrical enclosure. The ZEKS price book also states that a properly sized prefilter must be installed before the dryer; failure to install and maintain the prefilter will void dryer warranty.

Key Features

  • NC Series™ non-cycling design: continuous refrigeration for steady moisture removal.
  • CFX® exchanger technology: designed for efficient heat transfer and low pressure drop.
  • Capacity: rated for 150 SCFM.

Specifications

Model150NCH
Dryer TypeNon-Cycling Refrigerated Air Dryer
Flow Capacity150 SCFM
Compressor H.P..5 HP
Dimensions (in)W 19.7 × D 30.3 × H 37.5
Shipping Weight154 lb
End Connection1 1/2" NPT
Electrical Configuration (from isg_product_id)115-1-60
Recommended Prefilter (Model Number)ZFC235P (Field Installed)
Optional Gauge Assembly (Part Number)800795WCH (Field Installed)

Benefits

  • Protects downstream equipment: helps reduce moisture-related corrosion and contamination.
  • Improves system reliability: supports consistent air quality for tools, controls, and processes.
  • Right-sized capacity: 150 SCFM helps match system demand when applied at rating conditions.

Installation & Application Notes

  • Confirm inlet pressure, inlet temperature, and ambient conditions align with the dryer rating basis for the series.
  • Verify system demand does not exceed 150 SCFM at the rating conditions.
  • Allow clearance for service access and condensate drain routing during installation.

ZEKS 150NCH NC Series Non-Cycling Refrigerated Air Dryer is a strong fit when your system requirements match the listed capacity, pressure rating, and electrical configuration.

Frequently Asked Questions

ZEKS 150NCH NC Series Non-Cycling Refrigerated Air Dryer

▶️ Question: What is the rated capacity for this model?

Answer: This model is rated for 150 SCFM under the series rating conditions.

▶️ Question: What does a refrigerated air dryer do?

Answer: It cools compressed air to condense water vapor, then removes the condensate to help reduce moisture in the air system.

▶️ Question: What should I confirm before installation?

Answer: Confirm connection size, pressure rating, and electrical requirements match your system.

▶️ Question: What electrical information do I need to check?

Answer: Verify voltage, phase, and frequency match the unit nameplate before installation.

▶️ Question: What routine maintenance is typical?

Answer: Keep condenser surfaces clean, verify condensate drains operate correctly, and replace air filtration elements on schedule. It also lists footprint W 19.7 × D 30.3 × H 37.5.

150 NCH 115V Non-Cycling Refrigerated Air Dryer 1 Ph, 60 Hz
Qty