Description
ZEKS 14PETX PET-X™ High Pressure Refrigerated Dryer
The ZEKS 14PETX PET-X™ is a non-cycling, high pressure refrigerated dryer designed for compressed air systems operating at high pressure. The PET-X series is listed with a flow range of 371–2,750 SCFM and a maximum allowable working pressure of 680 psig.
This model is listed with both air-cooled and water-cooled performance ratings. A digital controller and electronic drain are shown as standard equipment, and listed optional packages are available for electrical and environmental protection.
Key Features
- Refrigerated drying: helps reduce moisture and condensation in compressed air systems.
- Dew point performance: rated for Not specified on PET-X pages (Form PPPTX-2412)..
- Capacity: rated for 981 SCFM (Air-Cooled) / 1326 SCFM (Water-Cooled).
- Pressure rating: up to 680 psig (maximum allowable working pressure).
Specifications
| Model | 14PETX |
|---|---|
| Dryer Type | PET-X™ Non-Cycling, High Pressure Refrigerated Dryer |
| Flow Capacity | 981 SCFM (Air-Cooled) / 1326 SCFM (Water-Cooled) |
| Max Working Pressure | 680 psig (maximum allowable working pressure) |
| Rated Dew Point | Not specified on PET-X pages (Form PPPTX-2412). |
| Operating Voltage | 460/3/60 (380/420/3/50), 230/3/60 (240/220/3/50), or 575/3/60 (500/480/3/50). Consult factory for 208/1/60 or 208/3/60. |
| Dimensions (in) | W 44.25 × D 39 × H 61.5 |
| Shipping Weight | 830 lb (air-cooled) |
| End Connection | 3" FLG |
Benefits
- Protects downstream equipment: helps reduce moisture-related corrosion and contamination.
- Improves system reliability: supports consistent air quality for tools, controls, and processes.
- Right-sized capacity: 981 SCFM (Air-Cooled) / 1326 SCFM (Water-Cooled) helps match system demand when applied at rating conditions.
Installation & Application Notes
- Confirm inlet pressure, inlet temperature, and ambient conditions align with the dryer rating basis for the series.
- Verify system demand does not exceed 981 SCFM (Air-Cooled) / 1326 SCFM (Water-Cooled) at the rating conditions.
- Keep operating pressure within the unit rating (up to 680 psig (maximum allowable working pressure)).
- Allow clearance for service access and condensate drain routing during installation.
ZEKS 14PETX PET-X™ High Pressure Refrigerated Dryer is a strong fit when your system requirements match the listed capacity, pressure rating, and electrical configuration.
Frequently Asked Questions
ZEKS 14PETX PET-X™ High Pressure Refrigerated Dryer
▶️ Question: What is the rated capacity for this model?
Answer: This model is rated for 981 SCFM (Air-Cooled) / 1326 SCFM (Water-Cooled) under the series rating conditions.
▶️ Question: What dew point performance can I expect?
Answer: It is rated for Not specified on PET-X pages (Form PPPTX-2412). pressure dew point under the standard rating conditions for the series.
▶️ Question: What is the maximum working pressure?
Answer: It is rated up to 680 psig (maximum allowable working pressure).
▶️ Question: What power does it require?
Answer: The unit configuration lists 460/3/60 (380/420/3/50), 230/3/60 (240/220/3/50), or 575/3/60 (500/480/3/50). Consult factory for 208/1/60 or 208/3/60..
▶️ Question: What routine maintenance is typical?
Answer: Keep condenser surfaces clean, verify condensate drains operate correctly, and replace air filtration elements on schedule. It also lists footprint W 44.25 × D 39 × H 61.5.
